|
#32610
|
LIFTER
VALLEY BAFFLE
Prevents hot oil from splashing on intake manifold, thereby eliminating power loss. Keeps surplus oil out of valve covers by eliminating oil splash from lifter bores. Maintains oil pressure (during pushrod or rocker arm failure) by keeping lifters in their bores, except with roller cams. |
| Small
Block Chevy |
32610
$33 |
| Big
Block Chevy |
32615
$33 |
| Small
Block Chrysler |
32620
$35 |
|
#40100
|
CRUSHPROOF
PREMIUM QUALITY PAN GASKETS
Milodon pan gaskets will not crush, split, shrink or squeeze out like inferior gaskets. You
couldn't tear them, even if you tried! Resistant to gas, alcohol and fuel. For leak free pan installation use the right gaskets the first time. You don't need an oil leak on your new motor because of a cheap set of $6 gaskets. |
| Small
Block Chevy, 55-85 |
40100
$20 |
| Big
Block Chevy, Mark IV |
40200
$20 |
| Ford
302 |
40300
$17 |
| Ford
351-W |
40350
$17 |
| Ford
351-C |
40400
$20 |
| Ford
390-428 |
40450
$20 |
| Ford
429, 460 |
40500
$20 |
| Small
Block Chrys, 318, 340 |
40600
$20 |
| Small
Block Chrys, 360 |
40650
$20 |
| Big
Block Chrys, 383-440 |
40700
$20 |
| Olds,
330-455 |
40800
$20 |
| Pontiac,
326-455 |
40900
$20 |
REPLACEMENT
WINDAGE TRAYS FOR MILODON PANS
These trays replace the trays in Milodon pans that were fitted from the factory. They come complete with new fastener assemblies but holes must be transferred for your pan. |
| Tray
# Fits: |
Oil
Pan |
Tray
# Fits: |
Oil
pan |
32660
$58 |
31145 |
31065 |
32680
$67 |
31190 |
31191 |
32665
$58 |
31170 |
31172 |
31195 |
31196 |
32670
$58 |
31167 |
31171 |
31556 |
31557 |
32674
$37 |
31502 |
31503 |
32685
$67 |
31176 |
31180 |
32675
$46 |
31504 |
32690
$67 |
31177 |
31187 |
|
|
#32500
|
PAN BAFFLE
Installed between the oil pump and rear main, this special baffle effectively prevents oil from "climbing" up the rear of the pan into the crankshaft during hard acceleration. An easy addition to assure added horsepower. |
| Small Block Chevy |
32500
$10 |
| Big Block Chevy |
32505
$10 |
|
#32640,
#32645
|
CRANKSHAFT SCRAPER
Additional "free" horsepower can be found by the installation of a crankshaft scraper. A scraper will remove any excess oil left on the crank & rods that the windage tray does not remove. Scraper requires fitting to individual crank and rod profile, as well as to engine stroke. Wiper should be fitted to within .045" from rods and .035" from crank counterweights. When installed, scraper is sandwiched between pan rail and block. |
| Small Block Chevy |
32640
$10 |
| Big Block Chevy |
32645
$10 |
|
#32065
|
TOP FUEL STYLE TRAYS
For stock stroke Alcohol motors and up to 1" stroke Fuel motors. They are intended for these professional applications only, providing maximum available crank scanvenging and zero splash back.
|
| 426 Hemi -Stock Stroke, Steel - 5.1 lbs |
32050
$122 |
| 426 Hemi Stroker up to 1", Steel - 5.1 lbs |
32055
$122 |
| 426 Hemi -Stock Stroke, Aluminum - 2.5 lbs |
32060
$205 |
| 426 Hemi Stroker up to 1", Aluminum - 2.5 lbs |
32065
$205 |
|
