Click here to go to our Home Page!
Home >> Camshafts >> COMP Cams >> Chrysler >> 273-360 >> Hyd. Roller
 
CompCams Camshafts
 Comp Cams		   COMP Cams Camshafts & Kits
Hydraulic Roller
Xtreme Energy/Computer Controlled

Tech Note: Chrysler began producing engines with hydraulic roller cams in 1986. These early roller cam engines still used the shaft mount rocker arms and has oil holes in the #2 and #4 bearing journal.

In 1992 the new Magnum engine was released using a pedestal mount rocker arm that oiled through the pushrod and did not have oil holes in the cam.

There were also two different styles of snouts on the cams, the longer snout (.950" from the first step), accommodates a fuel pump eccentric and the upper timing gear while the shorter snout (.650" from the first step), came in the fuel injected engines that do not use a fuel pump eccentric.

Using the WRONG cam core will result in engine failure. It is very critical that the new cam match the old cam's characteristics. Please call the CAM help line if you have further questions at 800-999-0853.
 
K-Kit
"Complete Kit"		 SK-Kit
"Small Kit"		 CL-Kit
"Cam & Lifter Kit"
Camshaft
Lifters
Matched Valve Springs
Valve Spring Retainers
Valve Locks
Valve Stem Seals
 Timing Chain Set
 Assembly Lube
 Decals
Instructions		 Camshaft
Lifters
 Timing Chain Set
 Assembly Lube
 Decals
Instructions		 Camshaft
Lifters
 Assembly Lube
 Decals
Instructions
 
Chrysler 273-360 c.i., 8cyl. 1964-2000
Hydraulic Roller Camshaft.
Application/
Camshafts		 RPM
Oper.
Range		 Camshaft
Part #		 Duration Valve Lift
w/1.5 rocker		 Lobe
Sep.
Angle		 K-Kit SK-Kit CL-Kit
advertised @ .050"
IN. EX. IN. EX. IN. EX.
Computer Controlled (1985-92 w/Shaft Rockers & Mech. Fuel Pump, Long Snout)
Best in a 318. Magnum engine. Good towing cam for Dakota P/U. This cam has oil holes and a long snout. 700
to
4800		 20-618-9
$299*		 254 262 199 206 .450 .450 112° N/A N/A N/A
Best in a 360 Magnum Engine. Good towing cam for full size P/U. Goof performance cam for Dakota. This cam has oil holes and a long snout, May require computer modifications. 800
to
5000		 20-612-9
$299*		 262 264 206 210 .450 .480 112° N/A N/A N/A
Best performance cam for 360 Magnum Engine. This cam has oil holes and a long snout will require computer modifications. 900
to
5200		 20-614-9
$299*		 264 274 210 220 .480 .480 112° N/A N/A N/A
Computer Controlled (1981-91 w/Shaft Rockers & Electric Fuel Pump, Short Snout)
Factory replacement for fuel injected engines with shaft mounted rocker arms. Good torque cam in 318. 700
to
4800		 20-628-9
$299*		 254 262 199 206 .450 .450 112° N/A N/A N/A
Performance cam for 318. Good towing cam for 360. May require computer modifications. 800
to
5000		 20-622-9
$299*		 262 264 206 210 .450 .480 112° N/A N/A N/A
High performance cam for 360. Will require computer modifications. 900
to
5200		 20-624-9
$299*		 264 274 210 220 .480 .480 112° N/A N/A N/A
Xtreme Energy (1992-02 Magnum Engines w/1.6 Rockers)
Super strong torque cam for 318 idle to 4500 RPM 700
to
4800		 20-744-9
$299*		 258 264 206 212 .480 .480 112° N/A N/A N/A
Strong towing cam for 360 performance cam for 318 with better exhausted and computer modifications. 1000
to
5000		 20-745-9
$299*		 264 270 212 218 .480 .480 114° N/A N/A N/A
Performance cam for 360. 1200-5400 RPM likes lower gears and exhaust Will require computer modifications. 1200
to
5400		 20-746-9
$299*		 265 273 216 224 .506 .506 114° N/A N/A N/A
Computer Controlled (1992-02 Magnum Engines w/1.6 Rockers)
Factory replacement for 318 with strong torque 700
to
4800		 20-608-9
$299*		 254 262 199 206 .480 .480 112° N/A N/A N/A
Performance street cam for 318. Excellent torque in 360. May require computer modifications. 800
to
5000		 20-602-9
$299*		 262 264 206 210 .480 .512 112° N/A N/A N/A
High performance cam for 360. Will require computer modifications. 900
to
5200		 20-604-9
$299*		 264 274 210 220 .512 .512 112° N/A N/A N/A
notes: Except as noted, not legal for sale or use on pollution controlled motor vehicles.
* Stock springs can NOT be used.
 
 
 
 
 
 
 
 
 
 
Sales/Tech Line: (603) 378-0090
Email: tech@FlatlanderRacing.com

Thank You for visiting Flatlander Racing
*All prices on this site are subject to change without notice. Flatlander Racing™ disclaims responsibility for any printing or typographical errors, and does not guarantee that all information is accurate.

Home  Policies  SiteMap  Translate  Import Parts  Can't Find Part?  Contact  Order Online