|
Home >> Lifters
>> Comp Cams >> Hi-Tech
Lite Lifters
|
|
|
|
|
Picture may not
represent actual lifter |
Hi-Tech Lite HTL Lifters
For Ford & Chevy Flat Tappet racing engines
These are specifically designed for racing applications requiring
solid lifter cams. These lifters are approx 20 gram slighter than
conventional solid lifters.
The manufacturing tolerances are held much tighter to ensure
consistent diameter as well as optimum radius on the bottom of the
lifter. There is an improved pushrod seat specifically designed for
excessive pressures of race applications.
Tests prove 100rpm increase in maximum engine speed. |
|
|
|
| Part # |
Description
(For Ford and Chevy flat tappet racing engines.) |
Size |
Price
(per set) |
| 803-16 |
V8 all with .875" HIP'd Material |
.875" |
$425 |
| 804-16 |
V8 all with .875" HIP'd Material
w/.012" oil hole
tappet face (no chamfer) |
.875" with hole |
$475 |
| 805-16 |
V8 all with .875 HIP'd material |
.875" +.001" OD |
$425 |
| 806-16 |
V8 all with .842" w/.012 oil hole in
tappet face
(no chamfer) |
.842" w/hole |
$315 |
| 808-16 |
V8 all with .875" (no side oil hole) |
.875" |
$425 |
| 809-16 |
V8 all with .875" lifter bore |
.875" |
$395 |
| 810-16 |
V8 all with .875" w/.012" oil hole in
tappet face
(no chamfer) |
.875" with hole |
$449 |
|
|
Send This Page To a Friend
|
|
|
|
|
|
|
|
|
|
|
|
|
Flatlander
Racing | Imports
| Contact Us | Can't
Find A Part? | Site Map | Order
Parts Flatlander Racing ©2002
24 Elm Street, Plaistow, NH 03865
(ph) 603-378-0090, (fax) 603-382-7508, (email) tech@flatlanderracing.com
www.flatlanderracing.com
|
www.importperformanceparts.net |
www.crateengine.net
|