 |
|||
| Home >> Pushrods >> CompCams | |||
|
|||
|
CompCams Pushrod Types (see Catalog for Part #'s) High Energy Pushrods COMP Cams® High Energy Pushrods™ are your best choice when building the engine for your street rod, RV, or daily driver engine. High Energy Pushrods™ are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy™ or Magnum Rockers. Magnum Pushrods The Magnum 5/16” and 3/8” Pushrods offer an affordable solution for your .080” wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, these pushrods are heat-treated for extended durability and may be ordered in sets of 8, 16, or as single pieces. Hi-Tech™ Pushrods COMP Cams® engineers have found that the pushrod is one of the most important members of the valve train and certainly the most taken for granted. Prior to extensive research at COMP Cams®, it was thought that the pushrod only had to be strong enough not to fail, bend or burn up at the ends. Now our engineers have learned that the frequency of the pushrod must match that of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today’s all out race engines demand the highest quality components at every step and COMP Cams® Hi-Tech™ Pushrods fill that requirement. The one-piece design from .080” wall seamless chromemoly tubing ensures the ultimate in strength and durability. The ends are precision formed, yielding added thickness in the critical tip area for strength, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated to ensure compatibility with guide plates and for maximum strength. They are OD ground for consistency and black oxide finished with a length and part number laser etched on the OD for ease of identification. Hi-Tech™ 5/16” Pushrods Hi-Tech™ Pushrods feature a one-piece design from .080” wall seamless chromemoly tubing that ensures the ultimate in strength and durability. The ends are precision formed, yielding added thickness in the critical tip area for strength, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated to ensure compatibility with guide plates and for maximum strength. All Hi-Tech™ Pushrods can be ordered in sets of 8, 16, or as single pieces. Hi-Tech™ 3/8” Pushrods Hi-Tech™ Pushrods feature a one-piece design from .080” wall seamless chromemoly tubing that ensures the ultimate in strength and durability. The ends are precision formed, yielding added thickness in the critical tip area for strength, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated to ensure compatibility with guide plates and for maximum strength. All Hi-Tech™ Pushrods can be ordered in sets of 8, 16, or as single pieces. Hi-Tech™ 3/8” One-Piece .065” Wall Pushrods Hi-Tech™ Pushrods with 3/8” diameter and a .065” wall thickness are made of high-quality 4130 chromemoly steel heat-treated to a minimum hardness of 60 on the Rockwell “C” scale. The use of Finite Element Analysis has helped us design this pushrod for superior performance and endurance. Applications include engines employing mid-range spring pressures and high engine speeds. Because of their increase in natural frequency, these pushrods help tune the valve train when subjecting the valve train to its maximum speed. Spintron® tests show that this product helps control valve motion, which results in capturing lost horsepower due to valve bounce. Hi-Tech™ 210o Radius Pushrods COMP Cams® Hi-Tech™ 210° Radius Pushrods were designed for high lift applications where pushrod and seat interference are problems at maximum lift. These pushrods have the same features of our Hi- Tech™ Pushrods with the addition of 210° radius rather than the standard 180º radius. These pushrods not only work great with rocker arms that feature cup type adjusters, they also are perfect for applications requiring more load bearing surface from the pushrod. Hi-Tech™ Oil Restricting 5/16” One-Piece .080” Wall Pushrods COMP Cams® offers 20 new Hi-Tech™ Pushrods for four different engine platforms that restrict oil flow. While the standard Hi-Tech™ Pushrods feature 0.100” oil holes, the oil restricting pushrod openings are half that size at 0.050”. The oil restricting pushrods are available for Ford 302cid Small Block engines as well as Ford 351cid Windsor engines, the classic Small Block Chevy engines and GM Gen III engines. For each engine platform COMP Cams® offers five different pushrod lengths to meet any need. The new oil restricting pushrods maintain the consistent Hi-Tech™ Pushrod features, including one-piece 4130 chromemoly material with a wall thickness of 0.080” and 60 Rockwell hardness. To avoid confusion, each oil restricted pushrod is clearly labeled as such right on the pushrod shaft. Dual Taper .125” Wall Pushrods COMP Cams® has just released their new Dual Taper Pushrods for racing and high performance applications. These 7/16” – 3/8”, .125” wall pushrods feature a unique dual taper for strength and lightweight construction. These new pushrods are made from special steel alloy and utilize a 210° tip for an increased load bearing surface and increased performance. Straight Tube 7/16” .125" Wall Pushrods Hi-Tech™ 7/16” Diameter Pushrods use an ultra-rigid large diameter design and high-strength material to avoid the harmful valve train vibrations that occur when smaller diameter pushrods “snap back” into position. |
|||
|
Sales/Tech Line: (603) 378-0090 Email: tech@flatlanderracing.com Thank You for visiting Flatlander Racing *All prices on this site are subject to change without notice. Flatlander Racing™ disclaims responsibility for any printing or typographical errors, and does not guarantee that all information is accurate. Home Policies SiteMap Translate Import Parts Can't Find Part? Contact Order Online |
