 |
|
Home >>
Flathead Ford |
|
|
 |
|
|
 |
Flathead Ford Stroker
Cranks
Brand new and hot off the production line, Flatlander Racing is excited to introduce Cast Steel Stroker Crankshafts available for
Flathead Ford. These cranks have standard mains and are available in 4.000", 4.125", and 4.250"
Strokes. These will work with late connecting rods with 2.138" pin diameters.
|
Part # |
Description |
Price |
|
FHC-4000 |
Cast Crankshaft- 4.000" Stroke x 7.00" rod x 2.138" pin |
$689 |
|
FHC-4125 |
Cast Crankshaft- 4.125" Stroke x 7.00" rod x 2.138" pin |
$689 |
|
FHC-4250 |
Cast Crankshaft- 4.250" Stroke x 7.00" rod x 2.138" pin |
$689 |
|
|
|
|
Flathead Ford Pistons
Brand new HnS Forged and High Silicon Cast Stroker Pistons will be available soon for Flathead Fords, as
well as H-Beam Rods. HnS Racing Pistons are made from the finest
quality, high silicon virgin material and will come with these special features:
Finally! Today's new technology for your 60+ year old motors. In the 1930's and 40's they
were still learning about piston and ring design. For the past 15 years, major manufacturers such
as Ford, Chevy, Chrysler and all the Imports have found that a thinner moly ring produces more
Horsepower (by as much as 15%) by reducing ring friction. This factor also increases gas mileage
with less "blow-by". Moly rings transfer heat to the block instead of raising piston temperatures,
which allows the fuel charge temperature to remain lower and produce added Horsepower. At higher
RPM's, a thin ring will conform more to the cylinder wall for less ring flutter. So GET SMART,
move into the 21st century and take advantage of today's technology with HnS Pistons!
|
|
|
Flathead Ford Engine
Rebuild Kit
Brand new Flathead Ford 239, '49-'53, 100HP Engine Rebuild Kit.
This kit includes the following:
 Oil Pump
Lifters*
Isky Camshaft (stock or HP)
Timing Gears
4-ring Cast Pistons
Gasket Set
Bearings - Main, Rod, & Cam
Part #MKF-2001.......... $1199
* Lifters not available until 01/06
Pistons and Rings may be ordered in oversizes of Standard to .080 over. Main and Rod Bearings may
be ordered in sizes Std., .010, .020, or .030 over.
You can upgrade to chrome moly rings for an additional $40. You may also upgrade to 3 or 4-Ring
Forged Pistons w/ either Standard or Thin Performance Rings. For pricing on upgrading to Forged Pistons, please call
us at (603) 378-0090.
|
|
|
|
|
Flathead Ford Misc.
Parts & Accessories
|
Part # |
Part |
Description |
Price Ea. |
|
CB15P |
Rod Bearings |
Flathead Ford - Clevite77 Rod Bearings (set) |
$139.99 |
|
MS109P |
Main Bearings |
Flathead Ford - Clevite77 Main Bearings (set) |
$109.99 |
|
SH21S |
Cam Bearings |
Flathead Ford - Clevite77 Cam Bearings (set) |
$27.99 |
|
ROH-2-11 |
H-Beam Rods |
Flathead Ford - H-Beam Rods 7.00" long x .750" floating pin (set)
(for 2.100
crank pin) |
$579.99
|
|
1056 |
Head Gaskets |
Flathead Ford - Fel-Pro Perf. & Sport Head Gaskets 3.420" Bore.
Late Motor
Composition |
$39.99 |
|
MS8903 |
Gasket Set |
Flathead Ford - Fel-Pro Intake Manifold Gasket Set '49-53 |
$23.99 |
|
MS8028B |
Gasket Set |
Flathead Ford - Fel-Pro Exhaust Manifold Gasket Set '49-53 |
$16.99 |
|
FS7283B |
Gasket Set |
Flathead Ford - Fel-Pro Gasket Set '38-48 24 stud/2 sm. water holes |
$62.99 |
|
FS7548B |
Gasket Set |
Flathead Ford - Fel-Pro Gasket Set '38-4824 stud/3 lg. water holes |
$62.99 |
|
VT-2032 |
Lifters |
Flathead Ford Lifters - '39-53 Mechanical Tappet (Adj.) |
$13.99 |
|
DM-19 |
Oil Pump |
Flathead Ford Oil Pump - '32-53 V8 3.9 (239)-All 8BA Engines |
$99.99 |
|
1003P |
Pistons |
Flathead Ford Federal Mogual Cast Pistons - '46-53 (set)
.210" crowned heads, RBP- not factory duplicate
Std.,20,30,40,60,80,100 |
$249.00 |
|
E247KC |
Piston Rings |
Flathead Ford Sealed Power Chrome Moly Piston Rings (set)
Std,30,40,60,80 |
$139.59 |
|
E247X |
Piston Rings |
Flathead Ford Sealed Power Cast Piston Rings (set)
Std,30,40,60,80 |
$89.00 |
|
C-2702 |
Cam Gear |
Flathead Ford Gear Drive Parts - '49-53
Cam Gear, Steel, 44 teeth
|
$59.99
|
|
C-2701
|
Crank Gear |
Flathead Ford Gear Drive Parts - '49-53
Crank Gear, 22 teeth
|
$36.99
|
|
C-2703
|
Cam Gear |
Flathead Ford Gear Drive Parts - '41-48
Cam Gear, Steel, 44 teeth
|
$45.99
|
|
C-2704
|
Crank Gear |
Flathead Ford Gear Drive Parts - '39-48
Crank Gear, 22 teeth
|
$36.99
|
|
C-2706
|
Cam Gear |
Flathead Ford Gear Drive Parts - '41-48
Cam Gear, Alum., 44 teeth
|
$79.99
|
|
C-2727S
|
Gear Drive Parts |
Flathead Ford Gear Drive Parts
Matched Set of C-2702 & C-2701
|
$79.99
|
|
V358 |
Valves |
Flathead Ford Speed-Pro Valves - '46-48 - 1.51" dia. head |
$12.50 |
|
V967 |
Valves |
Flathead Ford Speed-Pro Valves - '48-51 - 1.51" dia. head |
$8.00 |
|
V1041 |
Valves |
Flathead Ford Speed-Pro Valves - '52-53 - 1.51" dia. head |
$15.50 |
|
VS393 |
Valve Springs |
Flathead Ford Valve Springs - '46-51 - (single) |
$2.50 |
|
VS392 |
Valve Springs |
Flathead Ford Valve Springs - '52-53 - (single) |
$3.00 |
|
VK115R |
Valve Locks |
Flathead Ford Speed-Pro Valve Locks (Retainers)
Hardened (32 pieces) |
$19.00 |
|
|
|
|
|
|
|
|
|
|
|
Sales/Tech Line: (603) 378-0090
Email: tech@FlatlanderRacing.com
Thank You for visiting Flatlander Racing
*All prices on this site are subject to change without notice. Flatlander Racing™ disclaims responsibility for any printing or typographical errors,
and does not guarantee that all information is accurate.
Home
Policies
SiteMap
Translate
Import Parts
Can't Find Part?
Contact
Order Online
|
|
|
|