Intake Manifolds
Intake Manifolds
| FORD 351 Windsor V8 | |||
| PERFORMER 351-W | |||
 |
#7181 | Performer 351-W (non-EGR) |
$179.99 |
| Designed for for 1969 and later 351 Windsor Ford V8 high performance engines with Edelbrock Performer RPM cylinder heads, modified OEM cylinder heads or equivalent. The dual plane design offers good throttle response with excellent top-end power for the street. No provisions for choke or rear water crossover. Will fit 1964-1/2 to 1970 Mustangs. Will not fit under stock hood of 1974-78 or 1979-95 Mustangs. | |||
| Performer 351-W EGR | |||
|
#3783 | Performer 351-W (EGR) (4V H.O., 1984-86) | $209.99 |
| Designed for street 351 c.i.d. Ford Windsor V8s with EGR. #3781 is stock replacement/street legal part for 351-W 2V V8s; 1972-87 and works with either the OEM 2V carb or an aftermarket EGR 4V carb for off-road by using Edelbrock #8053 4V EGR plate and compatible EGR valve and gasket. #3783 is stock replacement/street legal part for 351-W 4V H.O. V8s; 1984-86. Performer 351-W #3783 includes provision for EFE valve on H.O. engines. Aftermarket 4-bbl. carburetors are not compatible with Ford Automatic Overdrive Transmission (AOD). | |||
| Performer RPM 351-W | |||
 |
#7181* | Performer RPM 351-W (non-EGR) | $179.99 |
| Designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock Performer RPM cylinder heads, OEM 12- or 16-bolt cylinder heads or equivalent. The dual-plane design offers good throttle response with excellent top-end power for the street. No provisions for choke or rear water crossover. Will fit 1964-1/2 to 1970 Mustangs. Will not fit under stock hood of 1974-78 or 1979-95 Mustangs. | |||
|
*Not legal for use on pollution controlled motor vehicles |
|||