Main >> Oil Pumps >> B&B



Oil Pump Accessories- B&B

Oil Pump Block Off
B&B Electrical oil pump off plate is used on the rear main cap when a dry sump/external pump is used. This unique block off is designed to "bolt right on" without drilling or tapping of the cap. Constructed of .625" thick steel and paralled ground to ensure proper torque valves.

Part No. Description Price
35300 SB & BB Chevy and V6; .625" Thick Steel Ground $19

Pickup Installation Tool
There is only one correct way to install press-in type oil pump pick-ups and B&B has the tool to do it. Made of high strength steel for repeated use and finished with a black oxide for appearance, this is a must have for the engine builder that insists on doing it right.

Part No. Description Price
35900 5/8" diameter tubes $45
35910 3/4" diameter tubes $45

Oil Pump Primers
The first few seconds of an engine's life are critical. B&B's Oil Pump Primers help start a motor off right by pre-lubing the bearings before firing the engine. The shaft is inserted in place of the distributor; a drill motor chucked on the small end of the primer spins the oil pump, pressurizing the oil galleys and insuring that there is an adequate supply of lubrication throughout the engine.

Part No. Description Price
65090 SB & BB Chevrolet $10
65100 Professional Model (w/ spacer to pressurize lifter galley); SB & BB Chevrolet $19
65105 Professional Model (w/Dist Drive SBC & BBC) $29
65110 260-302 Ford w/ 1/4" hex oil pump shafts $15
65115 Ford w/ 1/4" HX Drv & Dist Drive $20
65120 351-460 Ford w/ 5/16" hex oil pump shafts $15
65125 Ford w/ 5/16" HX Drv & Dist Drive $20