Main >> Intake Adapters >> PME Adapter Kits >> 9.2 Deck/351C 2V Heads/302 Intake

Intake Adapter Kits 9.2 Deck Height Block/351C 2V Heads/302 Intake Have you ever thought of putting a Supercharger on a 351C? How 'bout a fuel injected 351C? NOW YOU CAN! This plate was designed with all you Cleveland lovers in mind. The ports in the plate make the smooth transition from the rectangle intake side to the Cleveland oval  on the head side. The possibilities are endless! (Distributor Kit may be needed. See below!)

Intake Adapter Kit#/Description: Fits: Price AP-06C 351C Block/351C 2V Heads/302 Intake $315 AP-06C/Holley To use with Holley Supercharger $355 AP-06CG w/2 sets of gaskets 351C Block/351C 2V Heads/302 Intake $342 AP-06CG/Holley w/2 sets of gaskets To use with Holley Supercharger $365 AP-06W 9.2 SVO 351W Block/351C 2V Heads/302 Intake $315 AP-06W/Holley To use with Holley Supercharger $355 AP-06WG w/2 sets of gaskets 9.2 SVO 351W Block/351C 2V Heads/302 Intake $342 AP-06WG/Holley w/2 sets of gaskets To use with Holley Supercharger $365

Distributor Kit Fits Ford 351W, 351C, 351M, 400M, 429 and 460 Sometimes installing an adapter plate, like the PME AP-06C causes a distributor clearance problem. New valley plates may be thicker requiring an extended distributor length. A solution is the installation of a PME Distributor Kit. DK-01 increases the height of the distributor by 2 1/2". PME will modify this part for the MSD billet distributor at no additional charge. MUST READ! We do not know all of the 100's of different distributors made for these Ford motors over the years. You can order the adapter kit without the distributor kit, and if you end up needing it, you can call us. Or you can place an order for the distributor kit at the same time and we will be more than happy to credit you for the cost of the kit if you do not need it (shipping cost not refundable).

Distributor Kit: Part# DK-01  Price $112 Fits Ford 351W, 351C, 351M, 400M, 429 and 460 This Distributor Kit is designed to fit the Ford stock shaft size of 0.5315-0.5320 and a pilot size of 0.5145-0.5150. The length is also critical to proper installation. PME will provide you with a detailed instruction sheet for proper assembly.

Sales/Tech Line: (603) 378-0090 Email: tech@flatlanderracing.com Thank You for visiting Flatlander Racing *All prices on this site are subject to change without notice. Flatlander Racing™ disclaims responsibility for any printing or typographical errors, and does not guarantee that all information is accurate. Home  Policies  SiteMap  Translate  Import Parts  Can't Find Part?  Contact  Order Online