Camshafts- Schneider

The Datsun / Nissan motors are very popular due to their adaptability to large cam grinds.

Note: The 'L' series motors will require thicker lash pads when a performance cam is used.  Be sure to order them with your cam so that we can take measurements on the cam and determine the proper lash pad thickness.

Also: Component Kit # Suggestions are listed in Cam Tables, Component Kit pricing & descriptions are listed after each Camshaft Section

Datsun / Nissan 240/260/280Z SOHC 6 Cyl
Part #	Description	Grind #	Adv. Duration	.050" Duration	Valve Lift	Valve Lash	Lobe Sep.	Comp. Kit	Price
17030	Moderate idle.  Good power from 1500 to 5000 RPM.	260-F	260 260	226 226	.460" .460"	.008" .010"	107	49003	$219
17032	Good slalom grind.  Power from 2000 to 6000 RPM.	260-70F	260 270	226 232	.460" .460"	.008" .010"	107	49003	$219
17033	Excellent all purpose grind.  From 2500 to 6500 RPM.	274-F	274 274	220 220	.480" .480"	.008" .010"	107	49003	$219
17034	Rough idle.  Excellent performance.  From 2500 to 6500 RPM.	270-80F	270 280	232 240	.460" .460"	.008" .010"	107	49003	$219
17035	Mid range to top end.  Power from 3500 to 7500 RPM.	284-94F	284 294	240 244	.480" .480"	.010" .012"	107	49003	$219
17036	Rough idle.  From 3000 to 7000 RPM.	290-F	290 290	250 250	.495" .495"	.008" .010"	106	49003	$219
17038	Excellent road race power.  From 4000 to 8500 RPM.	300-F	300 300	256 256	.560" .560"	.010" .012"	106	n/a	$219
17040	5000 to 9000 RPM.	314-F	314 314	266 266	.590" .590"	.010" .012"	106	n/a	$219
17039	Competition only.  From 4500 to 8500 RPM.	311-F	304 318	268 276	.620" .624"	.008" .010"	104	n/a	$219